OverView
ACARD ARS-2160 SATA to Ultra 160 SCSI 68 pin Bridge Box for 2.5” SATA Drive is dedicated as general-purpose bridge of SATA to SCSI. With a 2.5” SATA drive installed into LVD SCSI-to-SATA bridge, it can be connected to SCSI host adapter and works as a standard SCSI Hard Disk Drive. Users can get the maximum benefits and high performance from SCSI Bus with SATA devices.
Features
- On-chip high speed ACARD RISC micro-controller
- A general purpose SCSI-to-SATA HDD converter
- Cost effective and higher system I/O performance
- Creates new SCSI devices in economic cost
- Designed in 3.5” form factor for a built-in 2.5” SATA hard disk drive
- Cross-platform operation supports Windows NT / 2000 / XP / 2003 / Vista, Linux, Mac, Sun
- Supports full LVD/SE SCSI interface
Specifications
- ACARD Chip: ARC767?ARC772
- LVD SCSI interface for up to 160MB/sec data transfer rate
- 68pins design for SCSI interface
- Support 2.5" SATA I,II Drives*
- Support SCSI RAID card
- Onboard flash ROM for easy firmware upgrade
- Selectable SCSI ID from 0 to 15
- Dimension:14.6cm x 10.1cm x 2.5cm (L x W x H)
*Note: Please refer to Compatibility List for SATA HDD
|
